Blog, Laboratory equipment, lumex agency

Measurement of mercury in materials

Portable mercury analyser

The Portable Mercury Analyser is used for analysing mercury in crude oil and petroleum products, as well as measuring the level of mercury in various materials.

The concentration of mercury in crude oil and petroleum products can vary widely, ranging from less than 0.1 ppm to tens of ppm. The measurement of mercury in crude oil and petroleum products above 5 ppb is covered under the ASTM D7622-10 (2015) standard. The standard for total mercury present in materials is determined by the direct cold vapor atomic absorption method using the ‘Zeeman background correction’ method and SN/T 4429.2-201 (2015), which specifies the determination of total mercury in crude oil using cold atomic absorption spectroscopy with Zeeman correction.

Mercury measurement method

The basis of the measurement work is based on the reduction of Hg(II) to the atomic state through thermal decomposition (atomic absorption method using a furnace). Mercury-containing compounds and their transfer to the analysis tube through air flow. Mercury concentration is measured by the amount of resonance radiation absorbed by mercury atoms in the wavelength region of 254 nm. The detection limit of the device is from ppb to ppm of mercury in different samples.

Sample analysis done by mercury measuring device in crude oil

Applications of mercury measuring device

Measurement of mercury in natural gas

Measurement of mercury in naphtha

Measurement of mercury in food

Measurement of mercury in water and wastewater (in the laboratory, well, etc.)

Measurement of mercury in cosmetics

Measuring mercury in industries and materials is to protect human health and the environment.

Advantages of mercury analysis device

Very fast analysis in less than 5 minutes

Wide range of concentration without creating “memory effect”

SRM of any compound can be used for calibration and QA/QC.

No need for cylinders with compressed oxygen or other carrier gas.

Low cost of analysis

The well-known Lumex company produces portable mercury analyzers of very good quality for simple/specialist applications. These equipment’s are used in the laboratories of all kinds of factories all over the world every day.

Artin Azma Mehr is the representative of Lumex in Iran. This company supplies the portable mercury analyzer device for domestic applicants and provides customers with valid warranty and after-sales service.

To get more information about how the device works, please contact Artin Azma Mehr company.

Tags: brand, Lumex, measurement of mercury in crude oil, measurement of mercury, portable mercury analyzer, Mercury Analyzer, Lumex agency, supply of laboratory equipment

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *