SPECTROSCAN МАКС-GVM
“SPECTROSCAN MAKC-GVM” WDXRF spectrometer determines elements from Na (Sodium) to U (Uranium) in solids, liquids or powders, in solutions and thin films, deposits on filters.
“SPECTROSCAN MAKC-GVM” WDXRF spectrometer determines elements from Na (Sodium) to U (Uranium) in solids, liquids or powders, in solutions and thin films, deposits on filters.
The spectrometer operation is based on irradiation of the sample with primary X-rays generated by X-ray tube, registration of the secondary fluorescence from the sample elements preliminary diffracted on a crystal, and calculation of the elements concentration with the help of calibration equation, which is a relation between the element concentration and intensity of the registered secondary emission from the element. The spectrometer has high resolution of spectral lines and therefore provides accurate determination of elements in complicated multicomponent substances.
Technical details:
“SPECTROSCAN MAKC-GV” is a desk top WDXRF spectrometer controlled by an external computer.
There are three blocks in it: spectrometer, vacuum pump and closed cycle water cooling system.
The measuring system of the spectrometer is in the vacuum chamber while the samples are at the ambient pressure, so no He is required for the sample chamber and all samples (including liquid and powder) may be studied without any special measures taken.
The Spectrometer is controlled with external computer.
Advantages:
Non-destructive analysis – all elements in the range from Na (Sodium) to U (Uranium) can be determined from one sample. Desk top spectrometer doesn’t require water supply or gas supply systems.
The measuring system of the spectrometer in the vacuum chamber while the samples are at the ambient pressure, so no He is required for the sample chamber and all samples (including liquid and powder) may be studied without any special measures taken.
Spectrum scanning and high resolution of crystal analyzers excludes close lines of different elements overlapping (therefore there is no need in their mathematical differentiation), provides correct background accounting. All these provide accuracy and reliability of analysis.
Automatic sample changer for 10 samples with two spinning samples for analysis of non-homogeneous samples minimizes need of operator activity while measurements.
The spectrometer is delivered precalibrated for customer’s analytical tasks, with required accessories set and sample preparation equipment if necessary.
Learn more:
“SPECTROSCAN MAKC-GVM” is a desk top WDXRF spectrometer controlled by an internal computer.
There are two blocks in it: spectrometric with closed cycle water cooling system and vacuum pump.
Spectrometric bloc is equipped with X-ray tube power of 160 W with a side output of radiation, goniometer, located in an evacuated volume, four automatically interchangeable analyzer crystal, two-chamber radiation detector, automated multiposition sample changer device.
Applications:
“SPECTROSCAN МАКС-GV” spectrometer is the most universal instrument of the SPECTRON instruments. Complete list of applications see in “Industries and Applications” section.
Ventilation pollution analysis
| Determined elements |
from Na to U |
|---|---|
| Energy resolution |
9 eV (Si Kα), 60 eV (Fe Kα) |
| X-ray tube anode voltage |
40 kV |
| X-ray tube capacity |
up to 160 W |
| X-ray tube anode |
Pd (or Cr) |
| Spectral resolution |
Crystal diffraction |
| Four crystal analyzers |
LiF (200), C (002), PET, KAP |
| Sample changer |
10 sample automatic, 2 spinning samples |
| Power supply |
220 V, 50 Hz |
| Consumed capacity from 220 V mains |
850 W |
| PC interface |
USB |
| Standards | |
| brand |