Amtax sc Ammonia Analyzers

Amtax sc Ammonia Analyzer, Outdoor, 0.05-20.0mg/L NH₄-N, One Channel Continuous Sample, 115-230 VAC

Hach Amtax sc is a efficient Ammonia Analyzer for Wastewater with Fast Response, Minimal Maintenance, and Precise Measurement. Ideal for Rugged Outdoor Installations with Easy Access to Reagents and Wear Parts

The Hach Amtax sc Ammonia Analyzer, with a 0.05 – 20.0 mg/L detection range and fast response time that includes sample preparation, is ideal for precise ammonia measurement in wastewater applications. The analyzer is environmentally controlled for rugged, outdoor installations and designed for easy installation at the measurement point. Its probe features a self-cleaning membrane, requiring minimal maintenance, and provides easy access to reagents and wear parts.

The Amtax sc must be used with a Hach Controller and is compatible with Hach SC4500 or SC1000.

Prognosys is a predictive diagnostic system that allows you to be proactive in your maintenance, by alerting you to upcoming instrument issues. Know with confidence whether changes in your measurements are due to changes in your instrument or your water.

Looking for Hach’s newest ammonia analyzer?
The NH6000sc offers the reliable data and low maintenance that you trust from Amtax — with a sleek new features.

Accuracy	Using standard solutions: 3% + 0.05 mg/L
Cable Length	2 m fixed power cable at analyzer
Dimensions (H x W x D)	720 mm x 540 mm x 390 mm
Enclosure Rating	IP55
Filtersystem included	No, use e.g. Filtrax
Flow	1 – 20 L/h Sample (free of suspended solids)
Fuse Protection	Via SC1000 controller or power box. Maximum of 2 analysers per SC1000 or power box
Indoor/Outdoor	Outdoor
Lower Limit of Detection (LOD)	0.05 mg/L NH4-N
Material	ASA/PC UV-resistant
Measurement Method	GSE (Gas Sensitive Electrode) with screw-on membrane cap
Measuring Interval	5 – 120 min, adjustable per 5 min.
Measuring Principle	NH4 is being converted to NH3 gas, wich is being measured at the GSE.
Number of Channels	1
Operating Humidity	95% relative humidity, non-condensing.
Operating Temperature Range	-20 – 45 °C
Outputs	Current output, relays and bus communication via SC controller
Parameter	Ammonia
Permissible Chloride Range	Max. Cl- concentration: 1000 mg/L
pH Range	5 – 9 pH
Power Requirements (Hz)	50 Hz
Power Requirements (Voltage)	115 – 230 VAC, powered by Power Box or SC Controller
Pressure Range	-30 – 50 mbar With continuous sample preparation; at overflow vessel
Range	0.05 – 20.0 mg/L NH₄-N
Reproducibility	2% + 0.05 mg/L
Response Time	< 5 minutes
Sample Level	Sample level in basin and filtration system must be below analyzer.
Sample Quality	Ultra filtrated or comparable.
Sample Temperature	4 – 40 °C (39 – 104 °F)
Sampling Option	One channel continuous sample from filtration unit, e.g. Filtrax
Special Features	ASA UV-resistant, lockable housing, rated to IP55 Automatic cleaning and calibration Extensive self-diagnostics Optional 2-channel version for continuous sample preparation
Storage Conditions	4 – 55 °C; 95% relative humidity, non-condensing
Warranty	12 months
Weight	Without sample preparation system and without chemicals: 31 kg
What's included?	0.05 – 20 mg/L NH₄-N, 115 VAC Amtax sc Ammonia Analyzer, 3 month supply of all necessary consumables at 5 minute cycle time, user manuals.
brand	HACH

هیچ ویدیویی برای این محصول موجود نیست.

Wide Measurement Range

Amtax sc Ammonia Analyzers are available in four measuring ranges. With detection limits as low as 0.02 mg/L and ranges up to 1000 mg/L, the Amtax sc can be used anywhere in the wastewater treatment process, from the influent or start of the nitrification process with high NH₄-N levels to the effluent with only low ammonium levels. In the lowest range it can also be used for drinking water applications.

Easy Installation

The Amtax sc Analyzer is designed to be installed at the measuring location, including outdoor locations. The housing is weatherproof and lockable so that the analyzer can be installed right at the basin, even in the toughest climates.
The Amtax sc easily mounts to a wall, rail- and stand-mounting options are available. Due to its SC technology the analyzer is ready for use in the network of the SC controller ("plug-and-play").

Optional with Sample Preparation or Second Channel

The Amtax sc analyzer works with a low-maintenance filtration system (e.g. Filtrax) that removes particles larger than 0.15 µm. The filtrate is sent to the analyzer while air bubbles constantly clean the filtration membrane.
The analyzer is also available as two channel version for measurement at two different sampling points.

Fast Response Time for Control of Nutrient Removal Process

Nutrient removal is a critical and sensitive process in wastewater treatment. Quick response is vital for optimal operation. The fast response time of only 5 minutesand selection of the measurement interval, make the Amtax sc Ammonium Analyzer the fastest responding ammonia analyzer on the market.

Low Maintenance and Simple Operation

The analyzer calibrates and cleans itself automatically and is equipped with comprehensive self-diagnostic routines. With at least a 3-month supply of reagents (for 5 min interval), the Amtax sc analyzer offers the most economical reagent consumption. Reagents and wear parts are easily accessible.